Electrical Panel Fire Suppression System
Electrical panel fire suppression systems use proprietary continuous linear sensor tubes that reliably detect a fire and actuate the release of extinguishing agent using pneumatic technology. These fully automatic, pre-engineered systems are designed to detect and extinguish fires inside LT, HT and MCC electrical panels, server racks, data centres and IT cabinets.
The heat-sensitive detection tubing is routed through the critical areas of the panel. As soon as fire is detected, suppression begins immediately — with no human intervention and no electricity required, so protection continues even during a power cut. Clean agents (HFC-227ea & FK-5-1-12) are safe for electronics, leave no residue and require no cleanup.
1 / 4
Electrical Panel Suppression Features
- Easy to install and use.
- Fully automatic detection & suppression — no human intervention.
- Works without electricity — no false alarms, self-monitoring.
- Suitable for electrical cabinets, LT/HT/MCC/DHP panels & control boxes.
- Cylinder sizes: 1–10 kg and 13.4 L.
- Clean agents: HFC-227ea & FK-5-1-12 — no residue, safe for electronics.
- Direct Low Pressure (DLP) systems discharge agent through the detection tube itself — no metal nozzles.
- Ideal for recharging stations, switch panels and relay stations.
📞 Get a Quote / Datasheet
Contact us for pricing, datasheets and installation quotes across India.
We know how crucial every moment can be when it comes to fire hazards. That is why this system can quickly detect the presence of fire using its robust sensors which are spread across the panel for rapid detection. Also, as soon as the presence of fire is detected, the system begins its work of fire suppression immediately without the need of human efforts.
The system uses appropriate methods of extinguishing fire instantly and effectively prevents the spread of the fire in other areas. There are very high chances of power cut in such a situation. But we cannot afford to compromise your security in such a situation either. That is why this fire suppression system works just as efficiently even without electricity.
Why Protect Electrical Panels?
Fire research shows most fires are electrical — they often start with a spark in the electrical main, server wiring or a gen set. Regardless of panel size, severe fire hazards can occur, causing major life and resource damage. Since electrical arcing is the primary cause of electrical fires, our DLP systems eliminate metal nozzles entirely for maximum safety.
Rapid Detection
Robust heat-sensitive sensor tubing spread across the panel detects fire within moments of eruption.
Works Without Power
The system operates fully pneumatically, protecting your panels even during a complete power cut.
Clean Agent — No Cleanup
HFC-227ea and FK-5-1-12 clean agents leave no residue and cause no damage to sensitive electronics.
Which fire suppression system should I buy for an electrical panel?
A tube-based automatic system is the most cost-effective choice — call for a free site assessment.
How much does an electrical panel fire suppression system cost?
Typically ₹1,50,000–₹5,00,000 per panel — Contact Supremex for a free assessment.
How long does installation take for an electrical panel system?
Usually 1–3 days for a single panel, confirmed after the free site survey.